Posted 19 June 2012 - 09:31 AM
8 Gb G.Skill DDR3-1866
Had it all up and running just fine till the other day doing some much needed maintenance, did a reboot and now nothing. The LED's along the "front" edge of the board are supposed to insinuate problems and light up if there is one. CPU LED stays lit all the time...
Cannot get into BIOS. I've cleared CMOS until I'm BLUE in the face.
Mobo came new from Ebay, CPU from the Egg.....
Open to ideas and suggestions...
edit: on closer inspection, I see that the lights are for "boot device, vga, dram, and cpu", the CPU light stays lit at all times and the DRAM light blinks twice and the rig shuts down...
edit #2: Pic of which CPU LED...
Posted 19 June 2012 - 02:08 PM
Posted 19 June 2012 - 02:47 PM
Posted 19 June 2012 - 04:47 PM
motherboard:- gigabyte EX58-UD3R
memory:- Corsair 6GB DDR3 Dominator PC3-12800C8 1600MHz
gpu:- asus gtx275
hard drives:- ocz 60gb agility ssd, 2xWestern Digital Caviar Black 1TB SATA-II 32MB Cache
power supply:- PC Power & Cooling Silencer 750 Quad
case:- Coolermaster ATCS 840
Posted 19 June 2012 - 05:54 PM
It was a battle, but I think I've got it...sitting here running anyway.....
Now, back to Folding@Home!!
Posted 01 August 2012 - 09:35 AM
Asus Crosshair V Formula mobo w/AMD FX-8120
Had it running on air in Mid Tower ATX case, pulled it and put in Full Tower ATX case on water. Now when I try to boot the 4 little Q-LED's along the front edge of the board flash in sequence as they should, but one stays lit. Boot Device. This is telling me that there is no boot device available. I've cleared CMOS, tried different hdd's, pulled out some hair, all to no avail...
Ideas or suggestions please??
Posted 01 August 2012 - 10:38 PM
Problem is that when I save settings and reboot, it doesn't reboot. Actually it seems to, but I get no video...and the dadgummed "Boot Device" LED lights up again solid.
I'm about to RMA this board to Asus in exchange for another if it doesn't straighten up...
Posted 03 August 2012 - 10:56 PM
Mobo has an O/C button too....hmmm.