Posted 05 March 2012 - 09:30 PM
Posted 06 March 2012 - 10:21 PM
Posted 29 May 2012 - 09:10 AM
i also need a few pointers to get the ram to run higher than 1600. cannot to seem to find the right settings for either the dominators to run at 1866 nor the gskills to run at 2133. the 2700k is sitting at 4500mhz on air for now till i get a water block.
3930k is close to reality as soon as i unload my amd rigs.
Posted 29 May 2012 - 11:12 AM
Nozzles > http://jab-tech.com/...OD-pr-3713.html
What kind of AMD rigs are you getting rid of?? I see nothing listed in TRP Hardware Deals... ?
Posted 29 May 2012 - 11:34 AM
working on my water cooling chassis now. build log soon.
amd gear is in my sig. have not posted them as im hoping they are sold as complete builds already.
Posted 29 May 2012 - 05:54 PM
Posted 29 May 2012 - 06:42 PM
That EK water block should do the trick and that radiator is killer.
Depending on what RAM you have and your IMC 1866 should be doable, 2133 could be a challenge.
Posted 29 May 2012 - 06:51 PM
pretty sure on both, if not i will let you know
Posted 29 May 2012 - 07:03 PM
Posted 29 May 2012 - 07:29 PM
Are you setting the timings on the G.Skill manually?? Get your RAM set to speed and then O/C the CPU...as CPU speed goes up, so will the RAM speed and you'll have to back it down, but I'm certain you already know that, being an O/C'er from Hell. I realize the difference in Chipset, but have a look at this video, the BIOS should be relatively the same... >
Posted 01 June 2012 - 08:02 AM